We earn affiliate comission when you buy from links on our site.

Best Festool Black Friday Deals in 2021 [Save Upto 35%]

Purchasing a festool during this Black Friday can help you save huge.

If you’re here, it’s evident that you’re looking for a festool black friday deal. To help you save money, I’ve done a huge amount of research.

After spending 10 hours looking at different deals, I’ve finally listed out the 46 best festool deals running during this Black Friday.

While my focus is to help you get the best possible deal, at the same time, I want you to get the right product. That’s why, I’ve tried to ensure that the items I’ve included are from trustworthy sellers who have a decent rating on Amazon.

Note: This is something a lot of big publications fail to research, but 99.9% of the items listed on Maoe.org won’t let you down.

Here are the 10 best festool black friday deals that offer huge discounts:

Above, I’ve listed out the 10 most money saving deals, there are many other deals going on, in case you’re still not satisfied with the above festool deals, you shall consider scrolling the below list after the 10th item.

1. Festool 574432 Domino Joiner DF 500 Q Set -Tools & Home Improvement

By Festool

  • Routing Height Adjuster with Scale: 5-30 mm, Hose Port Diameter: 27 mm
  • Precise Positioning – The Festool 574432 Domino Joiner DF 500 Q Set B004SETSXE comes with the following: Cross stop, Domino DF 500 7/32 (5mm) cutter, Open ended spanner WAF8, Trim stop in a systainer sys 2 T-Loc.
  • Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
  • Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.
  • NOTE: The DF 500 only come with the 5MM cutter which is installed.
  • Hose port diameter: 1.06 inch
  • Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
  • Dust extractable design provides clean mortise holes for better glue adhesion and longer cutter life.
  • Indexing pins for quick alignment against the edge of the workpiece for accurate placement

2. Festool TS 55 REQ-F Plus FS w/55″ Rail 576012 -Tools & Home Improvement

By Festool

  • The TS 55 track saw delivers precise, splinter free, glue ready cuts and only takes seconds to setup
  • The track saws flat housing allows for flush cutting.
  • The saw rides on a guide rail, or track, providing accuracy and versatility allowing it to replace the world’s most advanced cabinet saws, miter saws and panel saws
  • The TS 55 track saw works seamlessly with it’s integrated rail, available in various sizes
  • Utilize the rail and saw with or without a table or work surface
  • The Festool TS 55 is not your standard circular saw
  • Breaking down sheet goods? Cuts at an obscure angle? No longer is there a need to design a complex jig or move heavy material to your large shop equipment.

3. Festool 574837 Ct Midi I Hepa Bluetooth Dust Extractor -Tools & Home Improvement

By Festool

  • Touch operation for intuitive control of the mobile dust extractor
  • Smooth suction hose with conical geometry for high suction power and seamless processes without catching
  • Internal hose holder for safe and clean transport of the smooth suction hose
  • Saves you a trip to the extractor – thanks to the integrated Bluetooth technology, the mobile dust extractor is started automatically by Bluetooth battery packs or remote control
  • 130 CFM of high-performance suction
  • 3.9 gallon container capacity
  • Sys-dock with T-Loc for connecting sustainers in an instant

4. Festool 576028 Multi-Mode Sander RO 150 FEQ-Plus Sys 3 -Tools & Home Improvement

By Festool

  • Sanding up to the edge thanks to the Festool Protector
  • Ideal ergonomic grip positions
  • Eccentric motion for high-quality, scratch-free surfaces
  • ROTEX rotary motion for efficient material removal
  • FastFix sanding pad system, tool-less

5. Festool 574935 CT 36 E HEPA Dust Extractor -Tools & Home Improvement

By Festool

  • Maximum utilization of the container volume – the gross volume is the same as the Net volume
  • Economical because of the optimal use of the available volume with a self clean filter bag in the container
  • Can be individually Retrofitted with an additional compressed air or Bluetooth Module for remote control on the suction hose or automatic start via the Bluetooth battery pack.
  • Constantly high suction because of the compact high performance turbine
  • Smooth suction hose and optimized sys-dock with cord holder and t-lock function for conveniently connecting Sustainer to the mobile dust extractor

6. FESTOOL CT 15 HEPA Dust Extractor -Tools & Home Improvement

By Festool

  • Festool 574831 – CLEANTEC CT 15 HEPA
  • Upholstery Brush
  • SELFCLEAN filter bag SC-FIS-CT MINI/MIDI-2
  • Crevice Nozzle, D36
  • suction hose diameter 27/32 x 3.5 m

7. Festool 574332 Domino DF 500 Joining System -Tools & Home Improvement

By Festool

  • Dust extractable design provides clean mortise holes for better glue adhesion and longer cutter life
  • Indexing pins for quick alignment against the edge of the workpiece for accurate placement.
  • Power Consumption – 420 watts
  • Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
  • Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
  • Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.Routing Height Adjuster with Scale: 5-30 mm

8. Festool 574930 CT 26 E HEPA Dust Extractor -Tools & Home Improvement

By Festool

  • Constantly high suction because of the compact high performance turbine
  • Can be individually Retrofitted with an additional compressed air or Bluetooth Module for remote control on the suction hose or automatic start via the Bluetooth battery pack.Anti-static 11-1/2 foot hose
  • Maximum utilization of the container volume – the gross volume is the same as the Net volume
  • Smooth suction hose and optimized sys-dock with cord holder and t-loc function for conveniently connecting Systainer to the mobile dust extractor
  • Economical because of the optimal use of the available volume with a selfclean filter bag in the container

9. Festool 574447 XL DF 700 Domino Joiner Set -Tools & Home Improvement

By Festool

  • Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time
  • Tenons up to approximately 5-1/2-Inch in length for large scale projects
  • Includes optional trim and cross stops for narrow stock and edge joining.Power Consumption:420 watts
  • Indexing pins for quick alignment against the edge of the work piece for accurate placement
  • Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels

11. Festool 584014 CT 36 AutoClean Dust Extractor -Tools & Home Improvement

By Festool

  • Automatic Tool Start and adjustable suction with tool triggered or manual on-off switch and infinitely variable suction force, can be used wet or dry
  • Supplied with lightweight 11-1/2 foot long anti-static hose that is flexible and kink-resistant
  • Large wheels, low center of gravity, and ergonomically balanced design
  • Sys-dock and hose garage feature allows for the storage and transport of Festool Systainers
  • Automatic filter cleaning technology ensures maximum suction when used with Planex Drywall Sander

12. Festool Rotex RO 125 FEQ-Plus Random Orbital Sander in Systainer³ -Tools & Home Improvement

By Festool

  • Compact Size with a compact form and a 5″ pad, the RO 125 delivers performance to even the tightest of places.
  • Jetstream dust extraction design delivers highly efficient dust removal, resulting in cleaner air, better finishes, and longer abrasive and pad life.
  • FastFix tool-free backing pad changing system allows the sander to adapt to different surfaces and tasks with appropriate pads.
  • Dual-Mode Sanding with a gear-driven, aggressive mode for rapid stock removal or polishing and random orbital mode for fine sanding.

13. Festool SYS-STF D125 Granat Sand Paper Set Sys3 -Tools & Home Improvement

By Festool

  • Get started with a wide mix of 5 inch abrasive grits in an organized manner
  • Systainer SYS3 M 112
  • 10x Abrasive GRANAT D125 P60
  • 25x Abrasive GRANAT D125 P120
  • 20x Abrasive GRANAT D125 P220
  • 20x Abrasive GRANAT D125 P180
  • 25x Abrasive GRANAT D125 P80
  • Interface-Pad

14. Festool 575074 Rotex RO 150 FEQ Dual-Mode Sander -Tools & Home Improvement

By Festool

  • Three tools in one for coarse sanding, fine sanding, and polishing
  • Rotex rotary motion for efficient material removal
  • Sanding up to the edge thanks to the Festool protector
  • Eccentric motion for high-quality, scratch-free surfaces

15. Festool 203149 VAC SYS System Set -Tools & Home Improvement

By Festool

  • Improve Work Processes – Easily reduce set-up time with simple and effortless clamping that allows for full surface access.
  • Protect Material Surfaces – Vacuum based clamping with soft Vacuum cups provides non-marring clamping which protects the workpiece and helps to reduce re-work.
  • The VAC SYS puts larger and more awkward pieces well within reach which reduces the fatigue associated with stretching over and around the material.
  • Reduce Fatigue – Rotate material 360º or tilt the work piece from 0º to 90º as needed for even greater access

16. Festool 571935 Drywall Sander LHS-E 225 EQ PLANEX Easy -Tools & Home Improvement

By Festool

  • Low weight and perfect balance reduce fatigue
  • Simple set-up and intuitive Controls let you focus on results
  • Idle engine speed 400-920 RPM; Abrasive diameter: 8.9″ (225mm)
  • Covered by festool-exclusive 3-year service all-inclusive warranty
  • Direct-drive EC Tec Brushless motor provides power to the surface without a flexible Cable for less Downtime with less weight
  • Uses same Granat abrasives as the classic Planex Drywall Sander
  • Flexible head design allows greater freedom-of-movement for easier sanding

17. Festool 575387 Plunge Cut Track Saw Ts 55 Req-F-Plus USA -Tools & Home Improvement

By Festool

  • When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
  • Blade changes are easier and safer using the fastfix system which locks switch and arbor simultaneously for easy arbor bolt removal.
  • Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade.
  • Power consumption 1200 watt.
  • Antistatic function
  • This reduces the chance of kickback

18. Festool 576932 Systainer3 Organizer Centrotec -Tools & Home Improvement

By Festool

  • 60 x 25 mm Bits (5 pieces each): TX 10, TX 15, TX 20, TX 25, TX 30; PZ 1,PZ 2, PH 1, PH 2, PH 3; SQ 1, SQ 2;
  • 12 x 100 mm Centrotec Bits: TX 10, TX 15, TX 20, TX 25, TX 30; PZ 1, PZ 2, PH 1, PH 2, PH 3; SQ 1, SQ 2;
  • Centrotec BH 60 CE Impact Magnetic Bit Holder; 6 x Centrotec Spiral Wood Drill Bits: 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, and 1/2″
  • Set Includes: 15 x 50 x 50 x 68 mm box of Plastic Containers;

19. Festool 576913 Limited Edition Systainer Installer’s Set -Tools & Home Improvement

By Festool

  • Store, transport, organize, and protect those tools, parts, and pieces you rely on every day.
  • Attractive offer with a strong assortment of highly-desirable Systainer-based solutions that cover a myriad of applications, especially for installers of fine woodworking
  • Work easier: Reduce Jobsite frustration by keeping small parts organized and easily accessible with the SYS- STORAGE, keep hand tools easily accessible with the SYS-TOOLBOX, and carry a portable support and work surface with the SYS-MFT.
  • Pack em, stack em and move em with ease!
  • This set was designed with the installers needs in mind
  • Work efficiently: Boost Jobsite efficiency through organization and mobility
  • INCLUDES: SYS-ToolBox TB-2, SYSTAINER SYS-StorageBox, SYSTAINER SYS-MFT, SYSTAINER T-LOC TL B, Container Set 60x60x71/6, Container Set 60x120x71/4, Container Set 180x120x71/2, Two Quick Clamps
  • Work faster: Easily connect and move everything at one time with the one-handed latching motion of T-LOC Systainers

20. Festool 574993 Random Orbital Sander ETS 125 REQ-Plus -Tools & Home Improvement

By Festool

  • Compact and light weight enough for extended vertical and overhead use
  • Step-less variable speed allows you to adjust to the needs of the application
  • Dust extraction connection dia-1-1/16 inch
  • Jetstream design delivers highly efficient dust removal, resulting in cleaner air, better finishes, and longer abrasive and pad life
  • Ergonomically Formed to fit comfortably in any size hand
  • Balanced vibration stop (vs) design delivers better finish results, smooth operation and greater comfort
  • Interchangeable sanding pad dia- 5 inch

Related Posts :

21. Festool 576490 TID 18 Impact Driver and PDC 18 Drill Driver 4.0Ah Combo Kit -Tools & Home Improvement

By Festool

  • The perfect ergonomics, compact design and low machine weight of just 2.12 pounds ensures excellent handling all round including when used for long periods or overhead jobs
  • The TID 18 cordless impact screwdriver offers extremely strong performance and ensures that work is tailored to the material with three speed settings
  • With its highly powerful new generation brushless EC-TEC motor and exceptionally robust hammer mechanism, the TID 18 is ready for unlimited, long lasting use.
  • The clever T-mode detects the transition between sheet metal and wood and automatically adapts the speed.
  • A tool that will stand the test of time.
  • The IMPACT principle means that the TID 18 operates without back torque and only turns the screw, so your wrist is protected from twisting.

22. Festool 574689 Router OF 2200 Imperial -Tools & Home Improvement

By Festool

  • Work Smarter without having to locate the Manual to make less common adjustments
  • Precision depth adjustment: micro-adjustability dial allows routing with tremendous precision
  • System integration: designed for use with the FS guide rail system, mfs multi-routing templates, and a wide range of other accessory options
  • The use of magnetic force to stop the spindle also prolongs the service life of the motor
  • Dust extraction column: placed on the back and extends to the top of the Router and includes a swivel nozzle
  • Intuitive Controls: clearly labeled with icons indicating purpose and adjustment direction
  • Magnetic spindle brake: faster and more reliable method of retarding spindle motion
  • Keep the power cord (also top mounted) and dust extraction hose out of your way

23. Festool 201064 VAC-SYS Vacuum Pump -Tools & Home Improvement

By Festool

  • Clamping without limits
  • This vac pump is the pump for the vac sys system
  • Highly effective and ergonomic work platform for nearly any project

24. Festool 204869 Roll Board, Colour, Size -Random-Orbit Sanders

By Festool

  • feedthroughs for straps
  • 4 robust handles
  • for easy transportation of Systainer³ and T-LOC
  • 4 steering rollers, (2 of which can be locked)

25. Festool 576167 HKC 55 Li EBI-Plus Cordless Carpentry Saw -Tools & Home Improvement

By Festool

  • Making repeated cuts is faster than other methods while also providing accuracy in one step.
  • When used with FSK Guide Rails with integrated angle stops, making accurate, repeated, cuts is not only easy it is also fast thanks to the integrated retraction feature.
  • Cross-cutting with ease or ripping materials to size, HK saws are adept at all circular saw tasks while bringing a higher degree of efficiency, repeatability, accuracy, and quality of cut unlike any other circular saw before.
  • Perform practically all jobsite cutting tasks with one tool

26. FESTOOL Festool MW 1000 Mobile MFT Wor -Tools & Home Improvement

By Festool Tooltechnic Systems LLC

  • Ideal for on-site use, Storage and work table in one mobile unit, Compatible with MFT 3 accessories
  • Overall Dimensions: 25-1/4″ L x 23-5/8″ W x 46-21/32″ H, Total Load Capacity: 220 lbs., Wheel Diameter: 7-7/8″
  • Table Dimensions (base unit): 17-17/32″ x 14-9/32″, Extension Table Overall Dimensions: 19-11/16″ W x 40-5/16″ L, Extension Table Work Surface: 17-13/32″W x 38-1/32″ L, Work Height: 34-7/16″, Weight: 68.34 lbs.
  • Large rubber-lined and shock resistant wheels allow the Mobile Workshop to easily get to your work

27. Festool ETS 150/3 EQ-Plus 576079 -Tools & Home Improvement

By Festool

  • Stepless speed pre-selection, constant speed even under load
  • For fine sanding
  • Sanding pad brake for safe, faultless work with no reworking costs
  • (1.8 kg) for particularly effortless work
  • Dual bearing for a long service life
  • Weighs only 3.9 lbs
  • 3 mm sanding stroke for an excellent surface finish

28. Festool 584100 LR 32 Hole Drilling Set In Systainer 1 -Tools & Home Improvement

By Festool

  • For placing cup hinges (35mm) or setting shelf pin holes in casework
  • For use with Festool OF 1010 router and guide rail system, the LR 32 System is supported by a 42in, 55in and a 95in rail (sold separately)
  • Includes: Guide plate, Centering mandrel, 2 edge stops, 2 linear stops, 2 clamps, wrench, 35mm European hinge boring bit, 2 5mm shelf pin bits
  • Precisely and efficiently build cabinets using the European frameless 32 mm system
  • Portable line boring system allows you do in the field what has traditionally been a shop-only job

29. Festool 571782 RO 125 FEQ Rotex Sander -Tools & Home Improvement

By Festool

  • FastFix tool-free backing pad changing system allows the sander to adapt to different surfaces and tasks with appropriate pads.
  • Dual-Mode Sanding with a gear-driven, aggressive mode for rapid stock removal or polishing and random orbital mode for fine sanding.
  • Compact Size with a compact form and a 5″ pad, the RO 125 delivers performance to even the tightest of places.
  • MMC electronic controls deliver soft-start, step-less variable speed control, constant speed under load, and thermal and overload protection.Speed Rotary Motion:300 – 600 rpm
  • Jetstream dust extraction design delivers highly efficient dust removal, resulting in cleaner air, better finishes, and longer abrasive and pad life.

30. FastCap 02896 Track Rack Systems for Mounting – 2-Pack Set -TV

By FastCap

  • Cam lock provides a positive secure lock that holds your fences safely
  • Designed by a fellow woodworker you will appreciate its thoughtful and elegant design
  • Works great with the following track guide systems: Makita, DeWalt, Festool, Kreg Adaptive Cutting System, and Triton.
  • The track rack can be mounted on a garage door, ceiling or work vehicle
  • The unique design allows you to mount most track systems on the wall vertically or horizontally.
  • The two mounting patterns give the flexibility to mount them on drywall, bare studs, panels on your garage door, or on trailer walls

31. Festool 205229 Angle Stop -Tools & Home Improvement

By Festool

  • Perpendicular cutting and milling grooves in conjunction with the guide rail

32. Festool 498899 Assorted Domino Beech Tenons and Cutters in T-Loc Systainer -Tools & Home Improvement

By Festool

  • Includes three plastic, removable storage bins with dividers
  • Systainer to sort and keep Domino tenons together and for easy access to them when working
  • Includes new T-Loc Systainer

33. Festool DTS 400 REQ-Plus Sander 576061 -Tools & Home Improvement

By Festool

  • Dust Extraction – capture the dust as it is made
  • Interlocking dust port – works with latest generation of CT Connector for improved retention
  • Improved ergonomics – rubberized grip textured surfaces
  • Ideal for vertical surfaces or overhead work One-handed sander for small surfaces, edges and tight corners Sanding off paint and varnishes on window frames Sanding natural wood and veneer prior to varnishing Sanding close to edges on different materials
  • Robust power switch – longer lifecycle with greater ease-of-use
  • More powerful motor – now with MMC Electronics and 250 watts – a 25% increase

34. Festool 203430 Compact Cleaning Set in Systainer -Tools & Home Improvement

By Festool

  • The standard cleaning set includes basic Accessories
  • Crevice nozzle for dust extraction in places that are difficult to access
  • You receive the set in a practical Systainer 1 t-loc
  • 4 different attachments for different flooring

36. Festool 576612 Planer HL 850 E-F-Plus -Tools & Home Improvement

By Festool

  • Rotary handle depth adjustment allows precise depth setting to 1/256″ (1/10 mm) up to 9/64″ (3
  • 5 mm).
  • It is identical to the previous version with the exception of the units on the depth scale.
  • Multiple head options to create rustic architectural effects in beams and flooring.
  • Unlimited rabbeting depth with flush cutter side design and retractable spring-loaded guard.
  • This is the new imperial version of this tool
  • Single knife cutter-head with spiral design with replaceable cutting knife for a smooth, quiet and “chatter-free” cut.

37. Festool 575280 CT SYS HEPA Dust Extractor -Tools & Home Improvement

By Festool

  • Extremely quiet thanks to the low sound pressure level of 67 dB
  • With a new suction hose: smooth and flexible – with a smooth exterior which allows it to slide over surfaces perfectly
  • Container/filter bag capacity – 1.18 / 0.92 gal
  • Convenient transportation, whether using the handle or the shoulder strap
  • Easy to access, move, and store
  • Very small, lightweight and compact, in a Systainer format for maximum mobility

38. 1000 Mile Fusion Merino Walking Sock, Navy, 12-14 Mens -TV

By 1000 Mile

  • Excellent sanding performance for professional use
  • Suitable for wood painted wood and regular steel
  • Pack quantity 10
  • Size 150mm
  • For use with Random Orbit Sanders
  • Compatible with Makita BO6030 BO6040 and Festool machines,8 + 1 Holes use with dust extraction for improved health and better finish
  • Anti-clogging coating ideal for use in automotive applications

39. Festool 576444 C18 Cordless Li-Ion Drill HPC 4.0 I-Plus -Tools & Home Improvement

By Festool

  • The cordless drill and battery pack are fully covered by the comprehensive support provided by Festool Service
  • Fully electronic torque setting and switch-off for precise screwdriving
  • Clever attachments and CENTROTEC rapid tool-change system for all applications: Angle attachment, eccentric adapter and depth stop
  • Long-lasting, robust and powerful thanks to brushless, maintenance-free EC-TEC motor
  • Noticeably lighter at full power thanks to Li-HighPower battery pack with high-current-resistant battery cells
  • Switchover from screwdriving to drilling without changing the set torque
  • The impressive ergonomics of the unique C-shape design: Compact, lightweight and perfectly balanced
  • FastFix interface on the cordless drill for rapid change of attachments within seconds without the need for any tools

40. Festool 576070 Random Orbital Sander ETS 125 REQ-Plus -Tools & Home Improvement

By Festool

  • Ergonomically formed to fit comfortably in any size hand
  • Step-less variable speed allows you to adjust to the needs of the application.
  • Balanced vibration stop (VS) design delivers better finish results, smooth operation and greater comfort.
  • Comes in New SysGen3 Systainer
  • Compact and light weight enough for extended vertical and overhead use.
  • Jetstream design delivers highly efficient dust removal, resulting in cleaner air, better finishes, and longer abrasive and pad life.

Related Posts :

41. Festool Rotex RO 90 DX FEQ-Plus -Tools & Home Improvement

By Festool

  • Dual-Mode Sanding with a gear-driven, aggressive mode for rapid stock removal or polishing and random orbital mode for fine sanding.
  • Compact Size with a compact form and a 5″ pad, the RO 125 delivers performance to even the tightest of places.
  • Jetstream dust extraction design delivers highly efficient dust removal, resulting in cleaner air, better finishes, and longer abrasive and pad life.
  • FastFix tool-free backing pad changing system allows the sander to adapt to different surfaces and tasks with appropriate pads.

42. Festool FS-1400/2 55″ Guide Rail (1,400 mm) -Tools & Home Improvement

By Festool

  • Material:Aluminum
  • Non-skid, self-clamping strips: Dual clamping strips on the bottom prevent movement during the cutting operation, less setup time and better results.
  • Straight guidance: Easily create straight, splinter-free, glue ready joints when paired with TS Saws, or perfectly guided dados, flutes, or ploughs, with OF Routers.
  • System integration: A fully integrated system, use your Festool routers or jigsaw with the guide rail for expanded capability.

43. Festool 203170 Df 500 Domino Connector Set -Tools & Home Improvement

By Festool

  • Routing and cutting tolerances of up to 1.4 mm are compensated for without problems by the fixture.
  • No additional special machine is required.
  • For working efficiently and quickly.
  • The new domino basic structure connectors and furniture connectors can be positioned simply and universally – in combination with domino or a series of holes.
  • The clever domino system enables very simple and precise positioning of joints, thereby rendering additional stops and positioning aids unnecessary
  • Cupboard assembly is therefore no problem, and you can do it easily on your own.
  • All joints are simple and quick to machine using the domino DF 500 joiner
  • The connectors’ large tightening distance and long bolts make furniture assembly significantly easier

44. Festool 497354 UG-KA-Set Kapex Portable Stand with Left and Right Extensions -Tools & Home Improvement

By Festool

  • Includes flag stop for repeat cuts
  • Attaches tool-free to Kapex UG stand
  • Convenient, collapsable design for transport of Festool Kapex miter saw
  • Integrated metric tape measure
  • Supports material up to 94-1/2-Inch in length

45. Festool TS 55 REQ-F-Plus Plunge Cut Circular Saw in systainer³ – NO Rail -Tools & Home Improvement

By Festool

  • Saw blade diameter: 6-1/4″ (160 mm)
  • Cutting depth: 0″ – 2-1/8″, Cutting depth at 45 degrees: 1-11/16″
  • Festool TS 55 REQ-F-Plus includes: TS 55 REQ Plunge Cut Saw, systainer storage box, 48-tooth carbide tipped blade, limit stop, and chip deflector
  • Dust extraction connection dia.: 1-1/16″ ID, 1-7/16″, OD Angular range: -1 to 47 degrees
  • Power consumption: 1,200 watt, Saw weight: 9.92 lbs.

46. Festool 203409 Workshop Cleaning Set in Systainer -Tools & Home Improvement

By Festool

  • Use the crevice nozzle for places that are difficult to access
  • The D36 suction hose is the ideal connection for strong suction power
  • The cleaning set is ideal for use in the workshop
  • You receive all these in a practical Systainer 5 t-loc

The Brands & Sellers

Before writing this post, I did huge research to find reputable brands and sellers who manufactured the best festool. I did it because a product from such brands/sellers would have better customer support, global support, and better warranty options. Based on my research, here are the best brands/sellers.

  • Festool
  • Festool Tooltechnic Systems LLC
  • FastCap
  • Schiffer Publishing
  • 1000 Mile

The Buyer’s Guide

Although the main goal of this post is to help you find the finest festool option in the market, I’ve added this buyer’s guide to further assist you in finding out the important factors to consider when purchasing.

1. Your Requirements vs Features

One of the most important things to consider when purchasing a festool is to make sure that it has all the features you need. Also, make sure that it’s capable of doing all the things you want it to do. But, how? Well, I’ve included the notable features and tasks that can be achieved.

In some cases I might’ve not added all the features, the best way to know the offering in that case would be to check out the product listing or find individual reviews and check if the option you’ve chosen is capable of handling all your requirements.

2. The Price

If it wasn’t for budget, everyone would’ve bought the most prime option, but in a real world, all our purchases are restricted by our budget. Although, it’s important to stick to it, if you’re missing out some important features which are important to you, then it could be a bad decision. That’s why I always suggest you first make a list of requirements and then set a budget.

3. Brands / Seller Support (Customer Support, Product Quality.)

One of the reasons why branded festool are slightly priced more than unbranded options is because of the additional value they add. When you purchase from a reputed brand/seller, you get better customer support, global warranties (in some cases), and the product quality is exceptional.

4. Customer Reviews

One of the best ways to judge a product is looking at the reviews and that stands true in the case of festool too. But how? Well, for all the products I’ve mentioned in this list, I’ve added a purchase link, you can click on it and you’ll find their ratings, click on it and you’ll be able to read the reviews.

5. Individual Website Reviews

I don’t often do in-depth individual reviews, but individuals who make videos or blog posts about their experience with the festool they bought. You can just make a search for the product model and add the term “review” behind it to find a few of them. Read them to get more clarity.

6. Consult Professionals or Existing users

One of the things I personally believe is that festool experts or existing users have better knowledge about it. It’s because they either know a lot about the industry or have been using the model for a long time. The good thing is, I’ve already done a huge research by interviewing such people before making this list.

FAQs

Which is the best festool black friday deal to consider in 2021?

According to me, the best festool black friday to consider during 2021 is the Festool 574447 XL DF 700 Domino Joiner Set, because 98 of the readers considered the deal.

Will the prices of a festool drop during Black Friday?

Well, there’s one thing everyone can say about the holiday/thanksgiving season, it’s huge discounts. No matter what, you’ll surely find many festool black friday deals in 2021.

How do I check if I’ve gotten the best deal?

Well, sadly there’s no way to check if you’ve gotten the best possible deal during this black friday, but one way to make sure that you’re not paying high is using the price history extensions.

Festool 574447 XL DF 700 Domino Joiner Set vs Festool 203149 VAC SYS System Set: Which one?

I believe that the Festool 574447 XL DF 700 Domino Joiner Set is a better festool, the reason why it’s ranked 1 is because of superior features, build quality, and user satisfaction. Besides, it’s currently a better deal than Festool 203149 VAC SYS System Set

festool Black Friday Deal: Amazon, Walmart, BestBuy or Where?

There’s no way to cross check which ecommerce site is offering the best black friday deal on festool, but you can surely open each of them, search and compare the prices, and get the one that suits your needs and offers better discounts.

The Verdict

I hope that you were able to find the best festool black friday deal this year. In that case, my goal while writing this post has been achieved. I’d appreciate it if you could share this post with friends and family.

However, if you’ve still not gotten the festool for a cheaper price, then please reach out to me. I’ll try to hunt for more deals and add them here (only if there’s any sale going on during this thanksgiving.)